Model for Simulation of Dynamic Characteristics of the System Frequency Converter − AC Induction Motor

Authors

  • R. Rinkevičienė Vilnius Gediminas Technical University
  • A. Baškys Vilnius Gediminas Technical University
  • A. Petrovas Vilnius Gediminas Technical University

Abstract

Model of system frequency converter – induction motor and its dynamic characteristics is analyzed. The model of variable – frequency electric drive in PSpice is elaborated. Three phase induction motor is modelled as equivalent two-phase motor in stationary reference frame. Frequency converter is modelled by replacement it by two voltage sources, used to supply phase windings of equivalent two – phase motor. Results of simulation: starting transients of current, speed and torque of motor at no load are presented and analysed. In the motor, supplied by frequency converter, active communicating processes in the windings cause pulsations of electromagnetic torque of high amplitude, what do not decay even after transient time is over. Analysis of speed starting transients shows, that in the motor, supplied by frequency converter, they 20% longer, than at three-phase supply. Ill. 4, bibl. 7 (in English; summaries in English, Russian and Lithuanian).

Downloads

Published

2008-02-01

How to Cite

Rinkevičienė, R., Baškys, A., & Petrovas, A. (2008). Model for Simulation of Dynamic Characteristics of the System Frequency Converter − AC Induction Motor. Elektronika Ir Elektrotechnika, 82(2), 65-68. Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/11057

Issue

Vol. 82 No. 2 (2008)

Section

T 190 ELECTRICAL ENGINEERING

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.