Design and Application of Full Digital Control System for LLC Multiresonant Converter

Authors

  • P. Špánik University of Žilina
  • P. Drgoňa University of Žilina
  • M. Frívaldský University of Žilina
  • A. Príkopová University of Žilina

Abstract

With use of microprocessors and digital signal controllers as a control systems in power semiconductor converters, the new approaches for design of digital control must be implemented. Designing a digital control system requires use of control to output transfer function. For new, frequency controlled resonant converters, like LLC converter, new simulation based, numerical methods must be employed. This paper deals with new method for revealing the transfer function. For proposal of optimal controller, the direct digital design was used. Verification of designed digital control system is shown at the end of paper.

Downloads

Published

2010-11-19

How to Cite

Špánik, P., Drgoňa, P., Frívaldský, M., & Príkopová, A. (2010). Design and Application of Full Digital Control System for LLC Multiresonant Converter. Elektronika Ir Elektrotechnika, 106(10), 75-78. Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/9122

Issue

Vol. 106 No. 10 (2010)

Section

ELECTRICAL ENGINEERING

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.