Investigation of Inductor Poles Shape Influence on Magnetic Field Distribution

Authors

  • R. Lukočius Kaunas University of Technology
  • M. Šiožinys Kaunas University of Technology
  • V. Šiožinys Kaunas University of Technology

Abstract

The two dimensional magneto static problems are calculated using finite element method. The 6 non–silent pole inductorconstruction and coil current produced magnetic field is investigated. The step of time moments of symmetrical three–phase currentsystem is 0.001s. and the computation is performed for the time range 0 ÷ 0.02 s. The distribution of magnetic flux density valuealong axis x is investigated. The active zone mean magnetic flux density value and dispersion are calculated along axis x for each timemoment. Concentric circle area magnetic flux mean values are calculated. The calculation results could be used to construct the requiredparameters inductors.

Downloads

Published

2010-11-19

How to Cite

Lukočius, R., Šiožinys, M., & Šiožinys, V. (2010). Investigation of Inductor Poles Shape Influence on Magnetic Field Distribution. Elektronika Ir Elektrotechnika, 106(10), 17-20. Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/9109

Issue

Vol. 106 No. 10 (2010)

Section

ELECTRICAL ENGINEERING

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.