Approach to Efficiency of the Low Frequency Inductive Heating of Ferromagnetics

Authors

  • B. Miedzinski Institute of Electric Power Engineering
  • Z. Okraszewski Institute of Electric Power Engineering
  • X. Wang Beijing University of Posts and Telecommunications
  • Lj. Xu Beijing University of Posts and Telecommunications

Abstract

The heating system using a low frequency supply has been used for heating long ferromagnetic elements. The theoretical considerations using ANSYS program were performed for 2D distributions of the both temperature and magnetic field over the rail cross section. Transversal magnetic field was analyzed for different frequency as well as various MMF of the power source applied. The influence of the heater location and cooling intensity of the environment was taking into account. The calculation results create a basis for further three dimensional considerations allowing for selection of the heating strategy. Ill. 10, bibl. 3 (in English; summaries in English, Russian and Lithuanian).

Downloads

Published

2008-05-20

How to Cite

Miedzinski, B., Okraszewski, Z., Wang, X., & Xu, L. (2008). Approach to Efficiency of the Low Frequency Inductive Heating of Ferromagnetics. Elektronika Ir Elektrotechnika, 85(5), 3-8. Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/11144

Issue

Vol. 85 No. 5 (2008)

Section

T 190 ELECTRICAL ENGINEERING

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.