Estimation of Ultrasound Velocity Spatial Distributions in Green Ceramic Tiles

Authors

  • M. Kulokas Kaunas University of Technology
  • R. Kazys Kaunas University of Technology
  • L. Mazeika Kaunas University of Technology
  • R. Sliteris Kaunas University of Technology
  • V. Deksnys Kaunas University of Technology

DOI:

https://doi.org/10.5755/j01.eee.18.9.2810

Keywords:

Ceramic tiles, ultrasound velocity measurements, the zero-crossing and the cross-correlation technique

Abstract

From analysis of used and applicable quality control systems of ceramic tiles is clearly seen that the ultrasonic measurement systems have significant advantages. Each manufactured product in this case will be evaluated and the result will be obtained with a sufficient accuracy. Therefore, one of the applicable ultrasonic measurement systems for measurement of the density of ceramic tiles is analyzed in this article. In this case, ultrasound velocity measurements were performed in the sectors with a different thickness of the 0.105 m x 0.105 m size green ceramic tile using ultrasonic transducers developed in the Ultrasound Institute of Kaunas University of Technology with different acoustic contact zones. Such approach was necessary because the thickness of the tile in these zones is quite different.

DOI: http://dx.doi.org/10.5755/j01.eee.18.9.2810

Downloads

Published

2012-11-09

How to Cite

Kulokas, M., Kazys, R., Mazeika, L., Sliteris, R., & Deksnys, V. (2012). Estimation of Ultrasound Velocity Spatial Distributions in Green Ceramic Tiles. Elektronika Ir Elektrotechnika, 18(9), 67-70. https://doi.org/10.5755/j01.eee.18.9.2810

Issue

Vol. 18 No. 9 (2012)

Section

SIGNAL TECHNOLOGY

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.