Detection and Correction of the Controlled Object Transfer Function in the Smart Home Control System

Authors

  • Rimantas Barauskas
  • Valdas Grigaliunas Kaunas University of Technology
  • Marius Gudauskis
  • Linas Obcarskas
  • Kastytis Sarkauskas
  • Andrius Vilkauskas
  • Arunas Zvironas

DOI:

https://doi.org/10.5755/j01.eie.23.1.9839

Keywords:

Control system synthesis, smart home, linear feedback control systems, programmable control, transfer functions

Abstract

The method to determine dynamic characteristics of an object according to a performed experiment is presented. The so-called area method makes it possible to computerize the procedure, and parametric optimization is used to correct the obtained transfer function. All the procedures may be carried out by a controller of the heating system of a smart home. When ambient temperature and other conditions change, the transfer function of a controlled object may be automatically adjusted recalculating the parameters of a system controller for optimal usage of heat and electric energy

DOI: http://dx.doi.org/10.5755/j01.eie.23.1.9839

Author Biography

Valdas Grigaliunas, Kaunas University of Technology

Institute of Mechatronics

Downloads

Published

2017-02-06

How to Cite

Barauskas, R., Grigaliunas, V., Gudauskis, M., Obcarskas, L., Sarkauskas, K., Vilkauskas, A., & Zvironas, A. (2017). Detection and Correction of the Controlled Object Transfer Function in the Smart Home Control System. Elektronika Ir Elektrotechnika, 23(1), 3-9. https://doi.org/10.5755/j01.eie.23.1.9839

Issue

Section

AUTOMATION, ROBOTICS