Investigation of Partial Discharges at the High Voltage Electric Motor Bars

Authors

  • Gediminas Dauksys Kauno technologijos universitetas
  • Audrius Jonaitis Kauno technologijos universitetas
  • Saulius Gudzius
  • Alfonsas Morkvenas

DOI:

https://doi.org/10.5755/j01.eie.22.2.6983

Keywords:

Condition monitoring, electric field, induction motors, insulation, partial discharges.

Abstract

It is well known the use of on-line partial discharge (PD) measurements as an indicator of stator winding insulation condition. The scheduled PD measurements could be used as a test to evaluate the quality of the equipment. The test results could help to diagnose the insulation problems in motors and generators for corresponding action before failure occurs. Although a number of PD measurement methods exists, but the tests results of on operating rotating machines can be influenced by conditions such as humidity, temperature, terminal voltage, and load. This paper describes the development of PD imitation mathematical model in stator insulation. The experimental investigation with physical model was performed for adequacy assessment. The capacitive sensor was used for PD online monitoring.

DOI: http://dx.doi.org/10.5755/j01.eie.22.2.6983

Author Biographies

Gediminas Dauksys, Kauno technologijos universitetas

doktorantas

Audrius Jonaitis, Kauno technologijos universitetas

Elektros energetikos sistemų katedra, doc. dr.

Downloads

Published

2016-03-30

How to Cite

Dauksys, G., Jonaitis, A., Gudzius, S., & Morkvenas, A. (2016). Investigation of Partial Discharges at the High Voltage Electric Motor Bars. Elektronika Ir Elektrotechnika, 22(2), 9-12. https://doi.org/10.5755/j01.eie.22.2.6983

Issue

Section

ELECTRICAL ENGINEERING