A Parallel Connected Hybrid Microstrip-Substrate Integrated Waveguide Bandstop Filter

Authors

  • Kemal Guvenli epartment of Electronics and Automation, Hitit University, Corum, Turkey
  • Sibel Yenikaya Department of Electrical and Electronics Engineering, Bursa Uludag University, Bursa, Turkey
  • Mustafa Secmen Department of Electrical and Electronics Engineering, Yasar University, Izmir, Turkey

DOI:

https://doi.org/10.5755/j02.eie.31628

Keywords:

Substrate integrated waveguide, Microstrip, Parallel integration, X-band, Hybrid bandstop filter

Abstract

This study presents an original parallel connected hybrid microstrip-substrate integrated waveguide (PCHM-SIW) bandstop filter. A low-pass filter implemented on a microstrip structure and a SIW-based high-pass filter are connected in parallel to each other. In this way, the aim is to obtain a bandstop filter in the novel hybrid design. The parallel connected hybrid microstrip-substrate integrated waveguide (PCHM-SIW) bandstop filter is synthesised, simulated, and produced. The effects of connecting filters in parallel are discussed. It is seen from the results of CST Studio Suite simulation that PCHM-SIW bandstop filter has a bandwidth of 2.85 GHz and a center frequency of 4.26 GHz. The frequency change rate of the center frequency between simulation and measurement is 7.02 % where it is just 3.76 % for the deviation in bandwidth. The results of the simulation and those of the measurement are close to each other. These results converge to ideal analytical results.

Downloads

Published

2023-12-22

How to Cite

Guvenli, K., Yenikaya, S., & Secmen, M. (2023). A Parallel Connected Hybrid Microstrip-Substrate Integrated Waveguide Bandstop Filter. Elektronika Ir Elektrotechnika, 29(6), 26-32. https://doi.org/10.5755/j02.eie.31628

Issue

Section

HIGH FREQUENCY TECHNOLOGY, MICROWAVES