Determination of Optimal Pulse Current for ArcWelding

Authors

  • J. Ščemeliovas Vilnius Gediminas Technical University

Abstract

The manual and semi-automatic welding by pulse current (pulsing arc) is considered in the article. The advantages of welding by the pulsing arc are found out in comparison with welding by a constant arc. Using energetic calculation taking into account thermal balance at the electrode stub, optimal parameters of modulated current, such as frequency and duration of electrical pulses were established for different welding methods and regimes. By that stabilized heat, which needed for making melting drops, lower the level of metal splash and improve formation of the weld. Bibl. 12 (in English; summaries in English, Russian and Lithuanian).

Downloads

Published

2009-08-20

How to Cite

Ščemeliovas, J. (2009). Determination of Optimal Pulse Current for ArcWelding. Elektronika Ir Elektrotechnika, 95(7), 87-90. Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/10053

Issue

Vol. 95 No. 7 (2009)

Section

T 190 ELECTRICAL ENGINEERING

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.