Influence of 3D Scanning Data Scattering to Volume Measurement of Horizontal Fuel Tanks

Authors

  • V. Knyva Kaunas University of Technology
  • M. Knyva Kaunas University of Technology

DOI:

https://doi.org/10.5755/j01.eee.20.5.7102

Keywords:

3D laser scanning, fuel tank calibration

Abstract

Calibration of the fuel tanks must be made once in a 5 years. For calibration of the fuel tank 3D laser scanning and data processing method can be used. This article describes the influence of 3D laser scanning data scattering to volume measurement of horizontal fuel tank by means of relative error. It describes how to eliminate data scattering effects using filtering.

DOI: http://dx.doi.org/10.5755/j01.eee.20.5.7102

Downloads

Published

2014-05-13

How to Cite

Knyva, V., & Knyva, M. (2014). Influence of 3D Scanning Data Scattering to Volume Measurement of Horizontal Fuel Tanks. Elektronika Ir Elektrotechnika, 20(5), 72-75. https://doi.org/10.5755/j01.eee.20.5.7102

Issue

Vol. 20 No. 5 (2014)

Section

ELECTRONIC MEASUREMENTS

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.