Equivalent Source Method for Calculation of Periodic Commutation Electric Circuits

Authors

  • S. J. Bugenis VTDK Faculty of Technical Sciences
  • J. Vanagas Kaunas University of Technology
  • S. Gecys Kaunas University of Technology

DOI:

https://doi.org/10.5755/j01.eee.114.8.697

Abstract

In this paper the equivalent sources method which is intended to calculate the periodically switched electric circuits using harmonic analysis method is described. It is not possible to apply 'the harmonic analysis method to analyze such circuits, since the circuit configuration varies over time. When using the offered method, the switched source of direct voltage is replaced using the equivalent source of variable voltage, for which electric currents, voltages power and other electrical magnitudes are completely the same as in the case of the switched direct voltage source; the main difference is that after such substitution the voltage source becomes non-switched. Then the harmonic analysis method can be readily applied for calculation of the input of separate harmonics into the overall result. The essence of the method is illustrated by calculating the equivalent source for a simple electric circuit operated by first law of commutation. Ill. 6, bibl. 5 (in English; abstracts in English and Lithuanian).

http://dx.doi.org/10.5755/j01.eee.114.8.697

Downloads

Published

2011-10-21

How to Cite

Bugenis, S. J., Vanagas, J., & Gecys, S. (2011). Equivalent Source Method for Calculation of Periodic Commutation Electric Circuits. Elektronika Ir Elektrotechnika, 114(8), 57-60. https://doi.org/10.5755/j01.eee.114.8.697

Issue

Section

ELECTRICAL ENGINEERING