A Simple Contingency Selection for Voltage Stability Analysis

Authors

  • T. Okon Wrocław University of Technology
  • K. Wilkosz Wrocław University of Technology

DOI:

https://doi.org/10.5755/j01.eee.19.10.5887

Keywords:

Load flow, power systems, power transmission, power system stability

Abstract

The paper deals with a selection of potentially critical contingencies from the voltage stability view-point. Consideration of all contingencies is impractical. Before contingency analysis starts, one can state, that certain contingencies need not be taken into account. In the paper, after a short overview of the existing papers, in which the problem of the selection of contingencies is considered, the new method for selection of contingencies is presented. A selection of contingencies is based on results of testing of possible power transfers in a power network after the contingencies occur. During the tests, assessments of extreme values of active and reactive power flows, which change when power system state changes, are taken into consideration. In the paper, a computational example of utilization of the described method is given. At the end, the most important features of the method are pointed out.

DOI: http://dx.doi.org/10.5755/j01.eee.19.10.5887

Downloads

Published

2013-12-10

How to Cite

Okon, T., & Wilkosz, K. (2013). A Simple Contingency Selection for Voltage Stability Analysis. Elektronika Ir Elektrotechnika, 19(10), 25-28. https://doi.org/10.5755/j01.eee.19.10.5887

Issue

Section

ELECTRICAL ENGINEERING