Considerations on the Current Harmonics of Plate-Type Electrostatic Precipitators Power Supplies

Authors

  • G. N. Popa Department of Electrical Engineering and Industrial Informatics, Faculty of Engineering Hunedoara, Politehnica University Timisoara
  • C. M. Dinis Department of Electrical Engineering and Industrial Informatics, Faculty of Engineering Hunedoara, Politehnica University Timisoara
  • S. I. Deaconu Department of Electrical Engineering and Industrial Informatics, Faculty of Engineering Hunedoara, Politehnica University Timisoara

DOI:

https://doi.org/10.5755/j01.eee.19.5.2344

Keywords:

electrostatic precipitators, fast Fourier transforms, power harmonic filters, power quality, total harmonic distortion

Abstract

Plate-type electrostatic precipitators are the main installations of separating particles from industries (especially for large gas flow) and must operate in its electromagnetic environment without interfering with the operation of other equipments. The power supplies have non-linear elements that cause distortions of the sources currents. The main objective of this work is to analyze measure and simulate currents, voltages and powers from the sources that are used (thyristor-controlled reactor type) taking into account a new electric model, more close to reality, of the ESP sections. It’s analyzed the modification of the current waves shape and THD in case of using passive filters.

DOI: http://dx.doi.org/10.5755/j01.eee.19.5.2344

Downloads

Published

2013-05-01

How to Cite

Popa, G. N., Dinis, C. M., & Deaconu, S. I. (2013). Considerations on the Current Harmonics of Plate-Type Electrostatic Precipitators Power Supplies. Elektronika Ir Elektrotechnika, 19(5), 27-32. https://doi.org/10.5755/j01.eee.19.5.2344

Issue

Section

ELECTRICAL ENGINEERING