Monitoring the Efficiency of Particular Compressors of the Station
Results of the project “The Production of Compressed Air of Particular Machines Efficiency Analyze“ are presented. This project has been financially supported by the project FT – TA3/155 from the program “Tandem”, announced by the Ministry of industry and commerce of the Czech Republic. It is the application of the methods of theoretical informatics in the industrial practice, namely the particular compressor relative loading determination, which can be used later for diagnosis of the each machine, resulting in fluent service of production plants. The first phase of works was focused in the theoretical part of the project, i.e. the theoretical problems and algorithms procession. The following phases solved an implementation of these algorithms to PLC/PAC and the practical testing on the real equipment, i.e. the realisation on the real automaton and its application at the real surroundings of the compression station. For the purpose of real application in real conditions the PLC/PAC automaton from the Teco Kolín Company, type “Tecomat TC 700” has been selected. The control system calculated data are processed by the connected SCADA system. The results can be distributed also into the company managerial computer net. In the frame of the project tests the system of the company informatics system was replaced with a PC desk top computer, being placed directly at the compressor station. By virtue of the close cooperation between the Jan Evangelisty Purkyně University and the glass concern AGC Flat Glass Europe, both the real installation and practical measurements at its establishment Barevka Dubí was possible. Ill. 7, bibl. 4 (in English; summaries in English, Russian, Lithuanian).