The Recognition of Dielectric Layered Slab from Power Measurements

Authors

  • J. Ziemelis Riga Technical University
  • T. Solovjova Riga Technical University

Abstract

To determine layered structure and slab parameters using spectrum analyser, at some frequencies was measured the reflected powerfrom the slab. The slab parameters from measurements can be obtained by numerical comparison of measurements with those calculatedfrom the model of reflected power. The calculation of slab parameters meets some problems that in this paper are solved by simulationof layered structure. To obtain unique solution of the problem the measurements must be carried out for enough number of frequencies.By simulation it is estimated contribution of measurements errors on the exactness of layers parameters determination. Ill. 5, bibl. 5 (inEnglish; summaries in Lithuanian, English, Russian).

Downloads

Published

2004-08-20

How to Cite

Ziemelis, J., & Solovjova, T. (2004). The Recognition of Dielectric Layered Slab from Power Measurements. Elektronika Ir Elektrotechnika, 54(5). Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/10912

Issue

Section

T 180 TELECOMMUNICATION ENGINEERING