Analog Memory Circuit Parameters Calculation in the Signal Hold Mode

Authors

  • A. Marcinkevičius Vilnius Gediminas Technical University
  • V. Jasonis Vilnius Gediminas Technical University

Abstract

The generalized models of sample and hold circuit in the signal hold mode were proposed and created. Analytical equations for sample and hold circuit parameters calculation and dynamic errors estimation were derived. The sample and hold circuit with diode bridge key simulation results were presented. It was assumed, that signal is serrated, the clock frequency is 250 MHz, and the quantity of binary segments b = 8. The 0,5 μm bipolar integrated technology SPICE models were used for simulation. It was found, that output signal defflection not exceeds one least significant bit value, when hold capacity is 10 pF. It was demonstrated, when circuit model parameters are fixed, the velocity of sample and hold circuit can be increased by decreasing quantity of segments, or precision. Ill. 5, bibl. 7 (in Lithuanian; summaries in English, Russian, and Lithuanian).

Downloads

Published

2006-02-01

How to Cite

Marcinkevičius, A., & Jasonis, V. (2006). Analog Memory Circuit Parameters Calculation in the Signal Hold Mode. Elektronika Ir Elektrotechnika, 66(2), 36-40. Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/10591

Issue

Section

T 170 ELECTRONICS