Electric Circuit Analysis using Finite Element Modeling

Authors

  • J. Sveikata Kaunas University of Technology
  • P. Tarvydas Kaunas University of Technology
  • A. Noreika Kaunas University of Technology

Abstract

Problem of electric circuit modeling by finite element modeling is investigated. Possibilities of application of graphical redactor implemented in ANSYS/Emag environment and intended to form electric circuits are analyzed. Characteristics of finite elements CIRCU124 and CIRCU125, which are used to model various electronics elements and current and voltage sources, are presented in this paper. Example of electric circuit modeling is presented, in which AM modulator modeling is performed. Modeling consists of two stages – first, signal characteristic is calculated using its analytical expression , and later the same signal is modeled in ANSYS/Emag environment. Ill. 8, bibl. 7 (in English; summaries in Lithuanian, English and Russian).

Downloads

Published

2005-08-20

How to Cite

Sveikata, J., Tarvydas, P., & Noreika, A. (2005). Electric Circuit Analysis using Finite Element Modeling. Elektronika Ir Elektrotechnika, 63(7), 28-34. Retrieved from https://eejournal.ktu.lt/index.php/elt/article/view/10504

Issue

Vol. 63 No. 7 (2005)

Section

T 170 ELECTRONICS

License

The copyright for the paper in this journal is retained by the author(s) with the first publication right granted to the journal. The authors agree to the Creative Commons Attribution 4.0 (CC BY 4.0) agreement under which the paper in the Journal is licensed.

By virtue of their appearance in this open access journal, papers are free to use with proper attribution in educational and other non-commercial settings with an acknowledgement of the initial publication in the journal.